Relay Test Kit

Product Details:

We are offering Over Current Relay Test Kit to our clients.

Product Details:

Owing to our expertise in this field, our firm is engaged in supplying an extensive array of Relay Test Kit

Product Details:

MODELRLY – 801-1SUPPLY VOLTAGE230± 10% Volts, 50 / 60 Hz, AC Single Phase.-2SELECTION (MODE)All Outputs are connected through by – pass / control mode switch-3BY - PASS MODEIf “By pass” - mode is chosen then all outputs will be directly connected to the output terminals. In this option Timer is in “OFF” mode & “ON / OFF” Push button control is in “OFF”
position.-4CONTROL MODEIf “Push button” control mode is chosen then all outputs will be connected to the output terminals through the “ON/OFF” push button, according to the selection. In this option timer is in “ON”
mode.-5CURRENT OUTPUT0 to 2A AC (Measured by external Clamp meter)-6A.C VOLTAGE OUTPUT0 – 230 V AC With 2A control fuse.-7RATINGContinuous-8PROTECTIONFuse for Mains Input and all Outputs-9CONSTRUCTIONPowder coated MS Box with Carrying handle.-10DIMENSIONSW x D x H: 17.5” x 13” x 7.5” approx.-11WEIGHT23 kgs.approx.Accessories(charges applicable) :- Model : RLY – 8011. Test Cable (Current Cable) 2 Meters long with Crocodile Clip : 1 Set2. Test Cable (AC Voltage Cable) 2 Meters long with Crocodile Clip : 1 Set 3. DC Voltage Cable 2 Meters long with Crocodile Clip : 1 Set 4. Test Cable (Timer) 2 Meters long with Crocodile Clip : 1 Set5. Mains Card 2 Meter : 2 Nos.6. Spare Fuse 4 A (Main Fuse ) – 2 Nos.7. Spare Fuse 2 A (Main Fuse ) – 10 Nos.8. Instruction Manual – 1 No.9. Calibration Certificate – 1 No.

Two separate inputs & five outputs

Test outputs available:

Unit – I : 0 to 100 A, AC, 0 to 240 volts AC

0 to 240 volts DC. , Separate Variable Source

Unit – II: 0 to 2 A AC, 0 to 240 volts AC and aux.

Panel with clear and easy to follow legend.

Built in Timer for testing relays and circuit breakers.

Product Details:

RLY 360

Product Details:

FEATURES: Single Kit with two units Two separate inputs & five outputs Test outputs available:
Unit – I : 0 to 100 A, AC, 10 to 240 volts AC
Unit – II: 0 to 2 A AC, 10 to 240 volts AC and aux.0to 240 volts DC.
 Panel with clear and easy to follow legend.
 Built in Timer for testing relays and circuit breakers.
 Overload protection.
 Independent Digital readouts of current, voltage and time.
 The kit can be used for all types of relays (current and voltage relays / Low current C.T) except 6 current differential relay & Distance relays
 Weight : 22 kegs. Approx

• Over current relay
• Field Failure Relay
• IDMT over current relay
• Reverse phase or phase balance current relay
• Under current
• Bearing protective relay
• Earth fault relay
• Instantaneous over current or rate-of-rise relay
• Over Voltage relay
• A.C time over current relay
• Under voltage relay
• Circuit breaker auxiliary switch normally open
• Differential relay
• Circuit breaker auxiliary switch normally closed
• Negative sequence relay
• Trip coil supervision relay
• Synchronizing check relay
• Over flux relay
• Voltage or current balance relay
• Auxiliary relay
• Thermal relay
• Time delay stopping or opening relay (Break failure)
• Time delay relay
• Blocking relay
• Single Pole circuit Breaker timing
• Lock out relay
• Checking or interlocking relay
• Automatic selective control or transfer relay
• A.C reclosing relay
• All Types of Electro Magnetic / Static relays

Product Details:

VOLTAGE OUTPUT0-230 V AC / 2A – Variable voltage output through fuse units Separate pair of test terminals is providedRATING Continuous (3min ON / 10 Min. OFF)AMMETER "3 ½ Digit, 12mm LED type. Accuracy: ± 1% (Direct reading 0 – 50 A)For current ranges of 1A, 5A, 10A, 25A and 50A AC, readings can be noted directly from the digital ammeter.Above 50Amps & up to 100Amps readings can be taken through external clamp meter."VOLTMETER"3 ½ Digit, 12mm LED type. Accuracy:± 1 %(Common meter for measurement of Unit-1 & Unit-2 AC & Unit-2 DC output through a 3 position selector switch)a. Unit 1 :- Output is 0 –230 V AC, Voltmeter connected through selector switch (Switch Position-1)b. Unit 2 :-Output is 0- 230 V AC, Voltmeter connected through Selector switch. (Switch Position-2)c. Unit 2 :- DC output 0 –250 V DC, Volt meter connected through selector Switch (Switch Position-3)Any one voltage only can be read at a time."PROTECTION Control Fuse for Mains input and all outputs (current / Voltage)TIME INTERVAL METER "5 Digit, 12 mm LED, crystal time base.One five digit timer with toggle selector for NO/NC (for checking the opening and closing time) in milli second. The four position timer selection is provided for auto ranges (NO/NC test terminals, reset push button are also provided)Multi-range: a) 99.999 secondsb) 999.99 secondsc) 9999.9 secondsd) 99999. secondsThe timer will stop on getting the signal from the relay. When the timer stops the current and voltage output is de – energizedSeparate pair of test terminals (Relay trip contacts) is provided"DC SOURCE Variable DC Source 0 – 240 V DC / 2 A by Separate Variac continues rating

"FEATURES: Single Kit with two units
Two separate inputs & five outputs
Test outputs available:Unit – I : 0 to 100 A, AC, 0 to 240 volts AC0 to 240 volts DC. , Separate Variable Source
Unit – II: 0 to 2 A AC, 0 to 240 volts AC and aux.Panel with clear and easy to follow legend.
Built in Timer for testing relays and circuit breakers.Overload protection.
Independent Digital readouts of current, voltage and time.The kit can be used for all types of relays (current and voltage relays/Low current C.T) except 6 current differential relay & Distance relays??? Weight : 25 kegs. Approx"
PORTABLE OVER CURRENT RELAY TEST KIT - UNIT – ISUPPLY VOLTAGE 230 Volts , 50 Hz, (± 10%), AC Single Phase supply through Toggle switch & Control Fuse for Units 1 & 2.
PORTABLE OVER CURRENT RELAY TEST KIT - UNIT IISUPPLY VOLTAGE 230± 10% Volts, 50 / 60 Hz, AC Single PhaseSELECTION (MODE) All Outputs are connected through by – pass / control mode switchBY - PASS MODE "If “By pass” - mode is chosen then all outputs will be directly connected to the output terminals. In this option Timer is in “OFF” mode & “ON / OFF” Push button control is in “OFF”position.CONTROL MODE "If “Push button” control mode is chosen then all outputs will be connected to the output terminals through the “ON/OFF” push button, according to the selection. In this option timer is in “ON”mode.CURRENT OUTPUT 0 to 2A AC (Measured by external Clamp meter)A.C VOLTAGE OUTPUT 0 – 230 V AC With 2A control fuse.RATING ContinuousPROTECTION Fuse for Mains Input and all OutputsCONSTRUCTION Powder coated MS Box with Carrying handle.DIMENSIONS W x D x H: 17.5” x 13” x 7.5” approx.WEIGHT 23 kgs.approx.

Product Details:

Owing to our expertise in this field, our firm is engaged in supplying an extensive array of 230V Relay Test Kit

Product Details:

Product Details:

Owing to our expertise in this field, our firm is engaged in supplying an extensive array of Protective Relay Test Kit